Subscribe to Our Youtube Channel
Related Manuals for Air Oasis BP2400-110
Summary of Contents for Air Oasis BP2400-110
- Page 1 For use with models: BP2400-24, BP2400-110, BP2400-220 For safety and to ensure proper use carefully read the contents of this manual before operating or installing the unit.
- Page 2 2400 please read this manual in its entirety. Doing so will give you important information to keep you safe from harm and ensure you get the most benefits from your air purifier. For additional information please contact us: Mail: Air Oasis, LLC web: www.airoasis.com Attn: Customer Service e-mail: feedback@airoasis.com...
-
Page 3: Important Safety Instructions
Important Safety Instructions When operating any electrical appliance, basic precautions should always be fol- lowed for safety. RISK OF FIRE, ELECTRIC SHOCK, OR INJURY • Carefully read the entire contents of this manual. • Do not use outdoors. • Do not use the unit in areas of extreme heat or in the presence of flammable gas. - Page 4 Maintenance & Installation The Bi-Polar 2400 was engineered to have low maintenance. The brush heads on ® your unit should be cleaned periodically for optimal effectiveness. The Bi-Polar 2400 can be installed using included screws, zip ties, or clear ® adhesive strips as shown below.
- Page 5 Optimal Mounting Locations Ptac Installation Ceiling Mount Installation Furnace Installation 2400...
-
Page 6: Installation Instructions
Installation Instructions Preparing to Install Your New Bi-Polar 2400 unit ® The Bi-Polar was designed to be simple and effective. Remove the unit & mounting ® hardware (two self tapping screws) from the box. We recommend keeping the box and all packaging material for shipping the unit, should it ever need to be returned for repairs. - Page 7 4. Unit can be powered 24/7 or it may be interlocked to cycle with blower. 5. Green light will illuminate when powered and operating correctly. Black wire: Neutral or Ground Red wire: Positive Input 3 Models: BP2400-24 Usage 24 VAC / 400mA BP2400-110 Usage 110-120 VAC / 80mA BP2400-220 Usage 208-277 VAC / 40mA...
- Page 8 Installation Instructions Furnace Installation Step 1 - Confirm power is disconnected from AHU and remove face panel, expos- ing fan compartment. Step 2 - Locate power distribution block where main power is or will be connected to unit. Step 3 - Using the included self-tapping screws, attach the Bi-Polar 2400 as shown in the illustration below.
- Page 9 Installation Instructions Ptac Installation Step 1 - Disconnect power to air conditioner, remove service access panels and locate fan compartment. Using either the included self-tapping screws, zip ties, or clear adhesive strips, mount the Bi-Polar 2400 within the airstream as illustrated below.
- Page 10 Installation Instructions Ceiling Mount Step 1 - Confirm power is disconnected from the air conditioner and remove face panel, exposing fan compartment. Step 2 - Locate power distribution block where main power is or will be connected to unit. Step 3 - Lift up a portion of the protective wire screen and zip tie the Bi-Polar to the fan side of the screen.
- Page 11 Warranty Card. If you purchase this product from any source other than Air Oasis or an Air Oasis dealer, your purchase is “AS IS”, which means Air Oasis grants you no warranty, and that you, not Air Oasis, assume the entire risk of the quality and performance of this product, including the entire cost of any necessary servicing or repairs of any defects.
-
Page 12: Troubleshooting Guide
How do I clean debris off the Using any non abrasive object, lightly brush the heads brush heads? to remove debris. If the above does not repair the symptom please contact an Air Oasis Customer Service Representative: Phone: 1-800-936-1764 E-mail: feedback@airoasis.com Web: www.airoasis.com...
Need help?
Do you have a question about the BP2400-110 and is the answer not in the manual?
Questions and answers