System Installation
NOTE
The power cords of all devices installed in the system cabinet should be
plugged into the AC power strip in the cabinet. Only those devices
installed in the cabinet should
be
plugged into this power strip.
CONFIGURA TIONS
Table 3-1 shows the configurations that are allowed in the system cabinet. If the system cabinet is
configured in any other manner, it no longer meets UL certification requirements. Figure 3-2 shows how
the positions in the system cabinet are related to the location of the rails.
POSITION
2
3
4
Table 3-1. Allowable System Cabinet Configurations
ALLOW ABLE DEVICES
HP 9144A Tape Drive or HP 32450A SPU
HP 32450A SPU or I/O Extender
I/O Extender, HP 7945A Disc Drive, or empty
HP 7945A Disc Drive or empty
0984
3-3