HP 3000 Installation Manual page 8

RECEIVING THE SYSTEM
1-
~
____________
~IOO
The Hewlett-Packard Customer Engineer (CE) is responsible for installing the HP 3000 Series 37XE
computer system in accordance with the information in this manual. This includes installation and
verification of the HP 3000 Series 37 SPU, I/O Extender, and any peripherals that are part of the system
order. Hewlett-Packard data terminals should be installed when appropriate. Refer to the policy on
installing HP Data Terminals, as described by the Computer Support Division.
The customer should immediately report any flaws to the HP Customer Engineer and to the carrier or to
the carrier's agent. Be sure to save all crates, cartons, boxes, and packing material for inspection. Do not
make any verbal reports of damage or missing items without making a written report. The Customer
Engineer should report problems that are HP's responsibility to the Support Engineer at the appropriate
HP division.
Missing or damaged items will be replaced without waiting for the settlement of claims. Items shipped to
replace damaged parts will be billed to the customer until the damaged parts are returned to
Hewlett-Packard. The customer should not release the carrier until the shipment is verified to be in good
working order.
The customer is responsible for initially unpacking, inspecting, and locating the system. Disposal of
packing material is also the responsibility of the customer.
Each Hewlett-Packard shipment has a packing list attached to one of the cartons, specifying the materials
shipped. In addition, unpacking instructions are provided as required.
0984
1-1