System Integration Precautions; Personnel Protection - Toshiba Q9 Plus Installation & Operation Manual

System Integration Precautions

The following precautions are provided as general guidelines for the setup of the Q9 Plus Bypass ASD/
Q9 Plus Bypass Box system.
• The TIC Q9 Plus Bypass ASD/Q9 Plus Bypass Box is a general-purpose product. It is a system
component only, and the system design should take this into consideration. Please contact the TIC
Customer Support Center for application-specific information or for training support.
• The TIC Q9 Plus Bypass ASD/Q9 Plus Bypass Box is part of a larger system, and the safe
operation of the Q9 Plus Bypass ASD/Q9 Plus Bypass Box will depend on observing certain
precautions and performing proper system integration.
• Improperly designed or improperly installed system interlocks may render the motor unable to start
or stop on command.
• The failure of external or ancillary components may cause intermittent system operation (i.e., the
system may start the motor without warning).
• A detailed system analysis and job safety analysis should be performed by the systems designer
and/or systems integrator before the installation of the Q9 Plus Bypass ASD/Q9 Plus Bypass Box
component. Contact the TIC Customer Support Center for options availability and for application-
specific system integration information if required.

Personnel Protection

• Installation, operation, and maintenance shall be performed by Qualified Personnel Only.
• A thorough understanding of the Q9 Plus Bypass ASD/Q9 Plus Bypass Box will be required
before the installation, operation, or maintenance of the Q9 Plus Bypass ASD/Q9 Plus Bypass Box.
• Rotating machinery and live conductors can be hazardous and shall not come into contact with
personnel. Personnel shall be protected from all rotating machinery and electrical hazards at all
times.
• Insulators, machine guards, and electrical safeguards may fail or be defeated by the purposeful or
inadvertent actions of workers. Insulators, machine guards, and electrical safeguards are to be
inspected (and tested where possible) at installation and periodically after installation for potential
hazardous conditions.
• DO NOT allow personnel near rotating machinery. Warning signs to this effect must be clearly
posted at or near the machinery.
• DO NOT allow personnel near electrical conductors. Contact with electrical conductors can be
fatal. Warning signs to this effect must be clearly posted at or near the machinery/hazard.
• Personal Protection Equipment (PPE) shall be provided and used to protect the installer, user,
maintenance personnel, and all employees from any hazards inherent to system operation.
Q9 Plus Bypass ASD/Bypass Box Installation and Operation Manual
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
7