Cabling And Technology Specifications - HP J9827A Installation Manual

Table 3 Technology Standards and Safety Compliance (continued)
Technology
10-Gig LR
10-Gig ER
CX4 Media
Converter

Cabling and Technology Specifications

Table 4 Cabling Specifications
Twisted-pair copper
Twinaxial copper
Multimode fiber
Laser safety information
Compatible
with these EN/IEC
IEEE standard
standards compliance
IEEE 802.3ae EN/IEC 60825
10GBASE-LR
IEEE 802.3ae EN/IEC 60825
10GBASE-ER
(not an IEEE EN/IEC 60825
standard)
10 Mbps Operation
100 Mbps Operation
1000 Mbps Operation
10 Gbps Operation
CX4 cables
Direct attach cables
SFP Lasers X2 Lasers
Class 1 Laser
Product
Laser Klasse 1
Class 1 Laser
Product
Laser Klasse 1
Category 3, 4 or 5, 100-ohm unshielded
twisted-pair (UTP) or shielded twisted-pair (STP)
cable, complying with IEEE 802.3 10BASE-T
specifications.
Category 5, 100-ohm UTP or STP cable,
complying with IEEE 802.3u 100BASE-TX
specifications.
Category 5, 100-ohm 4-pair UTP or STP cable,
complying with IEEE 802.3ab 1000BASE-T
specifications—Category 5e or better is
recommended. See note on 1000BASE-T Cable
Requirements below.
Category 6 or 6A, 100-ohm 4-pair UTP cable, or
Category 6A or 7, 100-ohm 4-pair STP cable,
complying with IEEE 802.3an 10GBASE-T
specifications. See note on 10GBASE-T Cable
Requirements below, and see Table 4 for
distances supported with each cable type.
Twinaxial cables complying with IEEE 802.3ak
10GBASE-CX4 specifications.
One-piece devices consisting of a cable with
SFP+ connectors permanently attached to each
end, complying with SFF 8431 SFP+
specifications.
62.5/125 μm or 50/125 μm (core/cladding)
diameter, low metal content, graded index
fiber-optic cables, complying with the ITU-T G.651
Cabling and Technology Specifications
Media
Converter
SFP+Lasers Lasers
Class 1
Laser
Product
Laser Klasse
1
Class 1
Laser
Product
Laser Klasse
1
Class 1M
Laser Product
Laser Klasse
1M
27