Cone Fire Example - Orton AutoFire Plus User Manual

AutoFire® Kiln Controller

Cone Fire Example

Fire to Cone 6, increase firing speed 20%, and add a 15-minute hold.
(controller temperature is displayed in °F)
Just follow these simple steps:
Step Press
1 CONE FIRE
2 UP ARROW
3 ENTER
4 UP ARROW
5 ENTER
6 OPTIONS
7 ENTER
8 RIGHT ARROW
9 ENTER
10 UP ARROW
11 ENTER
12 STOP/ START
Note!
13 -
14 STOP/START
Description
Enters the Cone Fire mode.
(Press UP ARROW 11 times)
Scrolls to display of 6 (Cone Number).
Selects cone number 6.
(Press UP ARROW 3 times)
Scroll to display of 15 (Hold Time).
Selects the displayed hold time.
Selects options menu.
Selects SPd (speed) option
(default is standard)
( Press RIGHT ARROW 2 times)
Scroll to display of F 20 (Speed)
Selects 20% firing speed increase
Scroll to display of rEtn (or wait 20 seconds)
Returns to IdLE mode
Starts the selected cone firing.
The actual kiln temperature is displayed during an active firing cycle.
When the active firing cycle is completed. The final
temperature reached by the kiln will be alternately
displayed with the CPLt display.
Acknowledges completion of the completed firing
cycle and returns to IdLE mode. Also functions
as the Abort (Abrt) during a firing process.
User's Guide
Display
06, 1828
6, 2231
Hd, . 0
Hd, . 15
IdLE
SPd
Std
F 20
SPd
rEtn
IdLE
0074, (current kiln
temperature)
CPLt, Final
Temperature
IdLE
Abrt
8