Motorola IMPRES User Manual page 13

Adaptive single-unit charger
Hide thumbs Also See for IMPRES:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
When troubleshooting, always observe the charge indicator – Refer to Table 6.
Problem
1a. Charger contact is not
No charger
1b. No power to the charger.
indication
2a. Charger contact is not
Flashing Red
Indication
2b. Battery cannot be
3.
Flashing Yellow
Indication
Table 7. Troubleshooting
What it means...
being made.
being made.
charged.
Battery is waiting to be
charged. The battery
temperature may be
below 5 °C (41 °F) or
above 40 °C (104 °F) or
the battery voltage may
be lower than the
predetermined threshold
level for rapid charging.
11
What to do...
1a. Check that the radio with battery,
or the battery alone, is inserted
correctly.
1b. Make sure that the power cord is
securely plugged into the
charger and an appropriate AC
outlet, and that there is power to
the outlet.
2a. • Remove the battery from the
charger and replace it back
into the charger.
• Verify that the battery is a
Motorola authorized battery
listed in Table 1. Other
batteries may not charge.
• Remove power from the
battery charger and, using a
clean dry cloth, clean the gold
metal charging contacts of
both the battery and the
charger.
2b. Replace battery.
3.
When this condition is corrected,
the battery will begin charging.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents