Sabo 97-14 HS Operator's Manual page 17

3. Push PTO lever (A) forward to ENGAGE.
4. Try to start engine.
5. Engine MUST NOT start. If engine starts, there is a
problem with your safety interlock circuit. (See your
Authorized Service Center.)
Test 3
1. Operator on seat.
2. Lock the park brake.
B
3. Pull PTO lever (A) back to DISENGAGE.
4. Start engine and move throttle lever (B) to HALF-
R
SPEED ( ) position.
5. Push PTO lever (A) forward to ENGAGE.
6. Move throttle lever to FAST (
7. Raise up off of seat. DO NOT get off tractor.
8. Engine will begin to stop. If engine does not begin to
stop, there is a problem with your safety interlock circuit.
(See your Authorized Service Center.)
Test 4
1. Operator on seat.
OPERATING MACHINE
A
A
r
) speed position.
Operating Machine - 13
2. Push brake pedal down.
C
3. Pull PTO lever (A) back to DISENGAGE.
4. Put transmission shift lever (B) in N (NEUTRAL)
position.
5. Start engine and move throttle lever (C) to FAST (
speed position.
6. Release brake slowly.
7. Raise up off of seat. DO NOT get off tractor.
8. Engine will begin to stop. If engine does not begin to
stop, there is a problem with your safety interlock circuit.
(See your Authorized Service Center.)
Test 5
1. Operator on seat.
2. Lock the park brake.
A
B
r
)