Securing Your Safe
Your Vaultek™ safe can be secured via the included mounting screws to a flat surface using the pre-drilled holes
on the bottom and back of the safe.
TIP: Make sure you have enough clearance for the lid
to open properly before mounting the safe.
Position the safe on a flat surface where you want to
mount it.
Use a pencil to mark the holes for drilling.
Modular Interior
Your MX Series safe features a customizable interior system with a height adjustable pull out shelf and drop in
modules to help with storage and organization.
Adjust Interior Shelf Height
Lift the shelf vertically to remove from mounting brackets.
Remove the screw/mounting brackets from the sidewalls
and reinstall at the desired height.
Place shelf back onto the mounting brackets and press
down firmly to install.
Drop In Modules
A twin pistol rack is included and can be placed wherever
there is an insert cover. Remove the covers to access the slots
to attach each module, and snap into place. A range of different modules are available for purchase.
23 Vaultek™
TIP: Remove the covers to
access bottom mounting holes.
Drill pilot holes.
Position safe in place and install
screws through safe into pilot holes.
Tighten screws.
door (Figure K/L).
Find your 4-digit ID number engraved on the keys (Figure M).
FIGURE K
FIGURE L
FIGURE M
24 Vaultek™