Advertisement
Quick Links
XS35V4 Series Quick Guide【English】
__p
Front Panel
F3
F1. Power Button
F2. Power LED
F4
F3. HDD LED
F4. SD Card Reader
F5. ODD/ Second HDD (Optional)
F6. ODD Eject Button
F7. USB 2.0 Port
F7
F8. Vertical Stand
F8
Connecting the System
4
3
2
2
1
1
5
1
Connecting Monitor or LCD TVs
Digital and analog connections are available so the device can be
connected to computer monitors, flat-panel displays, plasma or LCD TVs.
Analog: Connect your computer monitor or LCD TV to the D-Sub Port.
D-Sub Cable
Display with D-Sub input
D-Sub Port
Digital: Connect a computer monitor or TV device to the HDMI port.
HDMI Cable
Display with HDMI input
HDMI Port
Digital: Connect a computer monitor or TV device to the Display Port.
Display Port Cable
Display Port Connector
Display Port
Back Panel
F1
F2
B1
B1. Microphone Jack
B2
B2. Headphone/Line-out Jack
B3
B3. LAN Port
F5
B4. Kensington Lock
B6
B5. USB 3.0 Port
B6. USB 2.0 Ports
F6
B8
B7. HDMI Port
B8. D-Sub (VGA) Port
B9. Display Port
B10. Power Jack (DC-in)
2
Connecting Keyboard/Mouse or USB Devices
USB Ports
3
Connecting LAN
Wall
RJ45 Cable
LAN Port
DSL/Cable Modem
4
Connecting Speakers and Microphones
Microphone,
Headphone/Line-out Jack
5
Connecting Power
3
Power Jack (DC-in)
2
6
Powering on the system
A. Begin Installation
For safety reasons, please ensure that the power cord is disconnected
before opening the case.
1. Undo one screw of the chassis cover.
2. Slide the cover backwards and upwards.
B4
2
3
B5
B7
Screw
1
B9
B. Memory Module Installation
B10
This mainboard does only support 1.35V DDR3L memory moudles.
1. Locate the SODIMM slot on the mainboard.
2. Align the notch of the memory module with the one of the memory
slot.
SODIMM slot
USB Keyboard/Mouse
3. Gently insert the module into the slot in a 45-degree angle.
4. Carefully push down the memory module until it snaps into the
USB Devices
locking mechanism.
Internet
3
Latch
Microphone/Headphone
C. HDD Installation
1. Mount the HDD into the bracket with four screws.
Speakers
2. As shown, install the HDD & bracket in the chassis and push it
towards the direction as indicated by the red arrow to connect
the HDD connector.
1
3. Tighten the HDD & bracket with three screws.
L
The product's colour and specifications may vary from the actually shipping product.
D. ODD or Second HDD Installation
1. Turn your Shuttle Slim PC upside down and remove another cover.
2. As shown, install the ODD/HDD Adapter Card with two screws and
connect the cable to CN2/CN1.
For the ODD: install the ODD Adapter Card
CN2
For a second HDD: install the HDD Adapter Card
If you are installing a second HDD, tighten the two nuts first just
as shown.
1
two nuts
2
CN1
3. Mount ODD/HDD into the bracket with screws.
For the ODD
1
Screw
2
45-degree
Bracket
angle
For a second HDD
Bracket
HDD
Latch
Screw
4. As shown, install the ODD/HDD & bracket in the chassis and push
it towards the direction as indicated by the red arrow to connect the
ODD/HDD connector.
For the ODD
ODD Connector
For a second HDD
HDD Connector
HDD Connector
5. Turn your Shuttle Slim PC upside down and tighten the ODD/HDD
& bracket with one screw.
Screw
For USB dongle
E. Complete
1. Replace the cover and refasten one screw.
2. Tear off the double sided protective membrane.
1
2
Protective Membrane
Screw
Using the Vertical Stand
Install the vertical stand and check that it is properly aligned, then
tighten securely with one screw.
ODD
Screw
Vertical Stand
XS35V4 default BIOS is for use with 64bit operating systems only.
A 32bit BIOS can be downloaded from the Shuttle website, if required.
Safety Information
Read the following precautions before setting up a Shuttle PC.
CAUTION
Incorrectly replacing the battery may damage this co-mputer.
Replace only with the same or equivalent type recommended
by the manufacturer. Disposal of used batteries according to
the manufacturer's instructions.
Laser compliance statement
The optical disc drive in this PC is a laser product.
The drive's classification label is located on the drive.
CLASS 1 LASER PRODUCT
CAUTION: INVISIBLE LASER RADIATION WHEN
OPEN.AVOID EXPOSURE TO BEAM.
53R-XS35V3-2F01
Advertisement
