Uemsi U-VUE Operation And Maintenance Manual page 5

Read Instructions
All the safety and operating instructions should be read before the unit is operated.
Safety Guideline for Power Cord and Power Outlet
Use a power cable that is properly grounded. The female receptacle of the cord set must
meet IEC-60320 requirements. (Fig. 1)
In the U.S. and Canada, the male plug is NEMA5-15 style UL/CSA labeled termination (Fig.
2). The plug is equipped with a grounding pin. Do not defeat the safety purpose of the
grounding pin.
Use a power outlet with a three-terminal grounded receptacle. The unit should be operated
only from the type of power source indicated on the rating plate.
DC Operating Guidelines
This unit is designed for use with a 12V DC automotive power supply. Never use it in a truck,
bus, or any other vehicle that has a 24V power supply. Allow the vehicle to run during
operation, as this will charge the battery circuit and supply an efficient source to the unit.
Servicing
Do not attempt to service this unit yourself as opening may expose you to dangerous voltage
or other hazards. Refer all servicing to qualified service personnel.
5