Turning Unit Off - Uemsi U-VUE Operation And Maintenance Manual

5. "Record Settings":
"Storage Location": Local storage, SD storage, or USB storage.
"Compression Format": H.264 or MPEG 4. Leave on H.264.
"Image Quality": Low, Fine, or High. Leave on Fine or High.
6. "Date and Time":
"Date": Adjust as needed.
"Time": Adjust as needed.
7. "Language": Leave this set to English.
8. "Format":
"Format Local Storage": Deletes all the data on the hard drive.
"Format SD Storage": Deletes all the data on the SD storage.
"Format USB Storage": Deletes all the data on the USB storage.
9. "System": DO NOT USE.

Turning Unit Off

1. Press the "OFF" position on the power switch. It is always a good practice to turn the
unit off prior to plugging in or unplugging the system.
2. Unplug the power cord and put away in the storage compartment.
3. Disconnect the 20' black interconnect cord, and wind it up on the push reel.
4. If you are using an external hard drive, or USB thumb drive, it will need to be
unplugged before closing the lid.
5. Make sure to screw the camera connector cap back onto the camera connector,
to avoid damage to the unit when closing the lid.
16