Table of Contents
Advertisement
OPERATION
Group Printing From The Same Original (Class Mode)
5.
With the Number keys, enter the desired number of sets.
Cl The maximum number of sets that can be made is 20.
6.
Turn on the power
dispenser (option).
Sw tch of the tape
7.
Press the Master Making key. Check the image position by making prints with the Proof
key.
IJ
If the image position is not correot, adjust it using the Image Position key (See page 24) or the
side plate fine adjustment dial (See page 25).
8.
Press the Print Start key.
After the last page of each printingset is fed out to the paper delivery table, the tape dispenser
dropsa strip of paper onto the top of the paper stack. This marks the end of each printinggroup.
If the power switchof the optionaltape dispenser is turned off or the tape dispenser is not installed
in your machine, the group printingcycle stops after each group is finished. Remove the group
fromthe paper delivery table and press the Print Start key to start the next group printingcycle.
32
Advertisement
Table of Contents
