Table of Contents
Advertisement
OPERATION
Standard Printinq
When you use larger than A4 or
81/2" x 11" size paper, set the original
tray extender.
I
4.
Press the Master Making key.
~
The original is fed, and a trial print is delivered to the paper delivery table.
5.
Press the Proof key and check the image density and the image position. Use the Proof
key until the image density is stabilized.
D
If the image position is not correct, adjust it using the Image
Position
key (See page 24) or the
side plate fine adjustment dial (See page 25).
6.
Press the Print Start key.
IJ After printing is completed, the same number of prints is automatically set for the next job.
H If the next original has been placed in the original table before the machine stops, that original
is fed automatically and a new master is made.
If you want to stop the machine during a print run, press the Stop key.
D
The numtmr of prints
set
in the counter are made and the machine stops.
20
.. .
Advertisement
Table of Contents
