Panasonic Lumix DC-TS7 Owner's Manual page 56

3. Recording Modes
Set the color to leave in ([One Point Color])
∫
1
Select [One Point Color], and press [MENU/SET].
2
Fit the color you want to leave in the frame at the
center of the screen, and then press [MENU/SET].
3
Check the color you have set, and then press
[MENU/SET].
• If you press [DISP.], you will return to step
• To change the setting, press [MODE], and select [One Point Color] again.
The set color is memorized even if the camera is turned off. In that case, the operation starts
3
from step .
• Depending on the subject, the set color may not be left in.
Setting the position and size of the light source ([Sunshine])
∫
1
Select [Sunshine], and press [MENU/SET].
2
Press 3 / 4 / 2 / 1 to move the center position of the light source.
Point for when placing the center of the light
source
A more natural appearance can be created by
placing the center of the light source outside the
image.
• Pressing [DISP.] will return the light source setting back to
the default setting.
3
Press [MENU/SET] to set.
• To change the setting, press [MODE], and select [Sunshine] again.
2
.
56