Wi-Fi Function - Panasonic Lumix DC-TS7 Owner's Manual

11. Using the Wi-Fi function

Wi-Fi function

Before Use
∫
• Set the date and time settings in advance.
• To use the Wi-Fi function on this unit, a wireless access point or a destination device equipped
with the wireless LAN function is required.
About the Wi-Fi connection lamp
∫
Lit: When the Wi-Fi function is ON or
connected by Wi-Fi
Blinking: When sending image data by operating the
camera
About the [Wi-Fi] button
∫
In this owner's manual, a function button to which [Wi-Fi] is assigned is referred to as the
[Wi-Fi] button.
• For information about the function button, refer to P42.
When the camera is not connected to Wi-Fi, press [Wi-Fi]. The camera will then be
ready to be connected to the smartphone. You can connect the camera directly to
the smartphone. (P152)
• When the camera is ready to be connected, you can press [DISP.] to connect with the same
settings as used previously. This is a convenient and quick way to establish a connection.
(P167)
After connecting to a Wi-Fi network, you can perform the following operations by
pressing [Wi-Fi]:
• When the camera is connected using [Remote Shooting & View], the screen on
displayed.
[Terminate the Connection]
[Change the Destination]
[Change Settings for Sending
Images]
[Register the Current Destination
to Favorite]
[Network Address]
(P31)
Terminates the Wi-Fi connection.
Terminates the Wi-Fi connection, and allows you to select
a different Wi-Fi connection.
Refer to P160 for details.
Registering the current connection destination or the
connection method, you can easily connect with the same
connection method next time.
Displays the MAC address and IP address of this unit.
149
P154 is