Adjusting The Compass - Panasonic Lumix DC-TS7 Owner's Manual

8. Sensor

Adjusting the compass

Adjust the compass when the measurement value does not match the actual bearing.
1
Select the menu.
>
MENU
2
Securely hold the unit vertically, and adjust by
turning it in a figure of 8 by rolling your wrist a
few times.
• An adjustment completed message is displayed
when the adjustment is successful.
• Perform the adjustment with the strap around your wrist to avoid dropping the unit.
• When the adjustment fails, move to a location with no effect from surrounding magnetism, and
perform the adjustment again.
[Setup] → [Calibrate compass]
115