Panasonic Lumix DC-TS7 Owner's Manual page 186

13. Others
Flash
The flash is not activated.
• Is the flash setting set to [Œ]?
> Change the flash setting.
• When the electronic shutter is used, the flash is not activated.
> Set [Shutter Type] to [MSHTR].
Monitor/Viewfinder
The Monitor/Viewfinder turns off although the camera is turned on.
• If no operations are performed during the set time period, [Auto LVF/Monitor Off]
activated, and the Monitor/Viewfinder turns off.
It may flicker for an instant or the brightness of the screen may change
significantly for an instant.
• This occurs due to the aperture of the lens changing when the shutter button is pressed
halfway, or when the brightness of the subject changes. This is not a malfunction.
Monitor and viewfinder do not switch when [LVF] is pressed.
• It is only displayed on the monitor when the camera is connected to a PC or printer.
Playback
The picture is not played back.
There are no recorded pictures.
• Is the card inserted?
• Is this a folder or picture which was processed in the PC?
If it is, it cannot be played back by this unit.
• Has [Playback Mode] been set for playback?
> Change to [Normal Play].
Red part of the recorded image has changed color to black.
• When Red-Eye Removal ([
> It is recommended to take a picture with the Flash Mode set to [‡], [‰], [
[Red-Eye Removal] on the [Rec] menu set to [OFF].
(P102)
(P127)
(P140)
] or [ ]) is performed, red parts may be corrected to black.
186
(P128)
(P135) is
] or [Œ], or