Pioneer ND-DVR100 Owner's Manual page 8

IMPORTANT
Always install this product in the specified installation position to ensure a safe field of view while driving and to
achieve full performance from the product.
1 Clean the installation area of
dirt and oils using the included
cleaning cloth.
2 Install this product.
Peel off the sticker on the Installation Bracket
(①) and attach this product to the front
windshield.
Firmly push the top of the product and both
sides of the LCD (②). Never touch the surface
of the LCD.
Installation Bracket
2
Use extreme care as the double-sided tape
on the Installation Bracket in (①) is extreme-
ly strong, and it will be difficult to reapply the
tape once it has been applied.
3 Route the cable.
Route the Cigarette Lighter Power Cable to the
passenger seat side.
1
4 Adjust the angle of the lens.
Note
A protective film is applied to the lens when the prod-
uct is purchased. Peel off this film.
Cigarette
Lighter
Power Cable
The power terminal will be extremely hot
immediately after using the cigarette lighter.
The tip of the Cigarette Lighter Power Cable
may melt or short circuit if it is plugged in
while hot. Wait for the terminal to cool be-
fore plugging in the Cigarette Lighter Power
Cable.