Function Buttons; Recording Screen - Pioneer ND-DVR100 Owner's Manual

Function Buttons

The functions of the function buttons are indicated by the icons displayed at the bottom of the screen.
The functions of the buttons will depend on the displayed screen.
Notes
The following restrictions will occur when the product detects that the vehicle is moving faster than
approx. 15 km/h. (Only when a GPS signal can be received.)
will be hidden.
⨋
The product switches to the recording state while the settings menu screen is displayed.
⨋
■ Recording
1 2 3 4
■ Settings menu
5 6 7 8
Status Display
The status display shows the operating status of this product.
1
18:16:23
Notes
The following restrictions will occur when the product detects that the vehicle is moving faster than
approx. 15 km/h. (Only when a GPS signal can be received.)
If the monitor display is set to [Always On], the recording screen and
⨋
When the screen is off, the screen can be displayed by pressing any button.
⨋
2 3
4
① Power off
② Display settings menu
③ Take photo
④ Record event
⑤ Back
⑥ Next settings screen
⑦ Previous settings screen
⑧ Confirm
① Recording indicator
This icon flashes during recording.
② Current time
The time displayed here is recorded as the event
recording time.
→ "System"-"Date/Time"
③ GPS reception status
The bars are green when receiving GPS signals.
GPS signals cannot be received when the bars
are white and a red × is displayed.

④ Recording screen

will be hidden.