Paper Size - Ricoh AP305 Operating Instructions Manual

Specifying paper size using the
operation panel
Use the following procedure to speci-
fy the paper size from the printer's
operation panel after loading paper
into the bypass tray.
A
Press { { { { Media} } } } .
Power
The following message appears on
the panel display.
<Media>
1.Paper Tray
B
After confirming that "1.Paper
Tray" is on the display, press { { { { En-
ter} } } } .
<Paper Tray>
*Tray1/A4
C
Use { { { { U U U U } } } } { { { { T T T T } } } } to display "Byps.",
and then press { { { { Enter} } } } .
Note
If there is no paper in the bypass
tray, the Error indicator stays
on.
D
Use { { { { U U U U } } } } { { { { T T T T } } } } to display "2. Paper
Size", and then press { { { { Enter} } } } .
The current paper size appears on
the panel display.
<Paper Size>
A3
On Line Reset Escape
Menu Media Enter
Error Data In
TFWS040E
j
l
j
l
j
l
E
Select the paper size you have
specified for the paper tray.
Standard Paper Size
A Use { { { { U U U U } } } } { { { { T T T T } } } } to display the pa-
per size that is in the tray, and
then press { { { { Enter} } } } .
The following message appears
on the panel display.
<Media>

2.Paper Size

Custom Size Paper
A Use { { { { U U U U } } } } { { { { T T T T } } } } to display "Cus-
tom", and then press { { { { Enter} } } } .
The following message appears
on the panel display.
<Custom>
jl/# Width 297mm
B Use { { { { U U U U } } } } { { { { T T T T } } } } to change the third
(leftmost) digit of the paper
width, and then press { { { { Enter} } } } .
The pointer (l) moves to the
right.
<Custom>
jl/# Width 197mm
Note
Press {Escape} to move the
pointer to the left.
Press {Escape} while the
pointer is located at the left-
most digit of the width to
cancel the settings and return
to step D.
Loading Paper
j
l
5
l
l
53