Making Printer Settings with the Operation Panel
Interpreting Configuration Page
Reference
Firmware Version
This shows the printer firmware version.
Printer ID
This is the serial number assigned to the printer board by its manufacturer.
Reference
This is the total amount of memory installed in the printer.
Option Interface
This indicates whether there is an optional parallel interface board or network
interface board installed in the printer.
Printer Information
Tray 1, Bypass Tray
This shows the paper sizes specified with the paper size dial and the opera-
7
tion panel for the standard paper tray and the bypass tray.
If you install the paper feed unit, it is described as "Tray2" and/or "Tray3".
Note
If "FRE" is indicated for bypass tray, it means "Custom Size" is set for by-
pass tray. "R" after paper size (A3, for example) means that paper is set in
the short-edge K feed direction.
Paper Size
A3K
B4 JISK
A4L
B5 JISL
A5L
B6 JISK
A6K
11" 17"K
1
8
/
" 14"K
2
108
Indication on the
Configuration Page
A3R
B4R
A4
B5
A5
B6R
A6R
DLR
LGR