Xantech XT-DL-IRK Installation Manual page 8

ITEM C:
ITEM D:
(2) 286D Dual Designer Emitters
(2) 283D Single Designer Emitters
ITEM E: ITEM F:
(1) PS12-0.5 (1) BOT-1.0
Power Supply Break Out Terminator
STEP 1:
Plug in the 2.1mm Coaxial power plug of the PS12-0.5 Power Supply (ITEM E)
into the jack labeled 12VDC on the 789-44 Connecting Block (ITEM B).
Plug the AC end of the PS12-0.5 Power Supply (ITEM E) into a 'un-switched'
120V AC Line outlet.
STEP 2:
Connect the 3.5mm stereo mini plug from the DL IR Receiver (ITEM A) to the 'IR
RCVR' input located on the 789-44 Connecting Block (ITEM B).
The RED connector connects to the RED receptacle.
8