System Construction - Mitsubishi Electric RD81DL96 User Manual

System construction

Configure the programmable controller system used in operation examples.
System configuration
(2)
(1)
(1) Programmable controller system
(2) SD memory card
(3) Ethernet cable
(4) USB cable
(5) Personal computer
Mounting and wiring modules
Operating procedure
1.
Insert an SD memory card into the high speed data logger module.
Page 66 SD memory card insertion/removal method
2.
Mount all the modules to the main base unit, and wire the power supply.
MELSEC iQ-R Module Configuration Manual
3.
Connect the CPU module and the personal computer with the USB cable.
MELSEC iQ-R CPU Module User's Manual (Startup)
4.
Connect the high speed data logger module and the personal computer with the Ethernet cable.
Page 75 Wiring of an Ethernet cable
Activating the system
Operating procedure
1.
Power ON the power supply module.
2.
Write the sequence program (sh081561eng-program_a.gx3) to the CPU module using GX Works3.
3.
Switch the mode of the CPU module to 'RUN'.
8 OPERATION EXAMPLE
80
8.1 Preparing for Operation
(5)
(3)
(4)