Setting item
Layout name
Number of pieces of data
Device (Head)
Data type
Size
8 OPERATION EXAMPLE
102
8.3 Creating Reports from Continuously Logged Data
9.
Select "RD81DL96YYYYMMDD....xls" from the list of
"To book".
10.
Select "Sheet1" from the list of "Before sheet", and click
the [OK] button.
The "Xbar-R Management chart" sheet is copied to the file
"REP01" on which the layout settings are configured.
Close "sh081561eng-layout_a.xls" because it is not used for
the later operation.
A sheet name must be changed by using the
[Changing sheet name] button on the "Layout
setting" screen.
If the sheet name is changed using other
methods, the layout settings will not
configure properly.
11.
Select "Current value", and click the [Add] button.
12.
Set each setting item according to the following table,
and click the
button.
Setting content
Production item
1
D502
String
10