Ricoh 2000 Facsimile Reference Manual page 67

❖ Specify the other party's IPv4 address
Specify a destination's e-mail address by changing the domain part of the e-
mail address to the other party's IPv4 address.
xxxx@[the other party's IPv4 address]
Example: The other party's e-mail address is "abc@defcompany.com" and the
IPv4 address is "192.168.1.10"; abc@[192.168.1.10]
Follow these steps to bypass the SMTP server.
A
Press the User Function key registered to this function to turn off the indicator.
Note
❒ When you specify destinations directly using the number keys, you can
specify whether or not to use the SMTP server for each destination.
❒ When you select destinations in the destination list, the SMTP server set-
ting specified in the Address Book is enabled.
❒ To send Internet Fax documents from a computer, use the LAN-Fax Driver
to specify whether or not to bypass the SMTP server. When sending with
the [Use device address] check box selected, the SMTP server setting speci-
fied on this machine is enabled.
Reference
p.157 "Sending Fax Documents from Computers"
"System Settings", General Settings Guide
"Fax Features", General Settings Guide
"Registering Addresses and Users for Facsimile/Scanner Functions", Gen-
eral Settings Guide
"Special Operations under Windows", Network Guide
ARX030S
Specifying a Destination
1
57