Ricoh 2000 Facsimile Reference Manual page 26

Transmission
A
Make sure that Memory Trans. indicator lights.
1
Normally Memory Transmission mode is selected.
If Immediate Trans. indicator is lit, press the {Transmission Mode} key to select
Memory Transmission mode.
B
Place the original.
C
Make the scan settings you require.
D
Using the number keys or a Quick Dial key, specify a destination.
To specify a destination using a Quick Dial key, see "Using the Quick Dial
Keys".
If you make a mistake, press the {Clear/Stop} key, and then enter the correct
number.
E
When sending the same original to several destinations (broadcasting),
press [Add Dest] to specify the destinations.
You do not have to press [Add Dest] when adding a destination using the des-
tination list.
16
ARX022S