Table of Contents
Advertisement
Access the camera via a web browser on devices such as
o
a smartphone, tablet terminal or PC
1
Display the "MENU"F"STATUS"F"Network" screen.
Type
SSID
Security Type
Passphrase
IP Address
MAC Address
Live Streaming
.
Check the displayed IP address.
2
(Operation on a smartphone, tablet terminal or PC)
Start up the web browser on the terminal you wish to connect to the
camera, enter the "IP Address" that you have verified in Step 1 into the
address field and confirm the entry.
.
If "192.168.0.1" is displayed in "IP Address", enter "http://
0
192.168.0.1".
3
A login screen appears.
Enter the user name (jvc) and password (default value: 0000) and
confirm the input.
.
4
The main page of the camera is displayed.
.
Memo :
The password can be changed in "MENU"F"System"F"Network"/
0
"Settings"F"Web"F"Login Password".
Network
********
RY980-
***
WPA2
192.168.0.1
Connection via an Access Point
Internet Connection
This mode of connection enables access to the web functions of this camera
via the Internet from devices such as a smartphone, tablet terminal or PC.
* To use this function, it is necessary to get ready a wireless LAN router
compatible with UPnP (Universal Plug and Play) and an Internet
connection that allows a global IP address to be acquired.
"What is UPnP?" (A p. 78)
"What is global IP address?" (A p. 78)
Use a wireless LAN router that supports UPnP.
0
(Products that come with a Wi-Fi certification logo)
To check whether UPnP is supported, please refer to the instruction
manual of the wireless LAN router in use.
Memo :
Depending on the wireless LAN router in use and signal strength, you may
0
experience connection problems or slow connections.
When operating the zoom function using a smartphone, the response may
0
be slower compared to using the camera.
Obtaining a Dynamic DNS (DDNS) Account
o
By obtaining a dynamic DNS account, this unit may be used on the web as
usual even if the IP address changes when making an access to this unit via
the Internet.
Only the JVC Dynamic DNS service can be configured on this camera.
0
To obtain (register) an account, perform the following steps.
1
Access the following URL from a browser and register for a provisional
account.
(Operation on a PC or smartphone)
https://dd3.jvckenwood.com/user/
Set your e-mail address as the user name.
2
Check that you have received a confirmation e-mail to the address used
for the provisional registration, and access the URL stated in the e-mail.
(Operation on a computer or smartphone)
3
Check the account information (user name and URL for access (WAN)).
Write down the information needed for access.
Using Wi-Fi
81
Advertisement
Table of Contents
