Table of Contents
Advertisement
Preparing for Connection
Operating Environment
Operation has been verified for the following environments.
Computer
o
OS: Windows 7
0
Web browser: Internet Explorer 11
OS: Windows 10
0
Web browser: Edge
OS: Mac OS X
0
Web browser: Safari 11
Smartphone/Tablet Terminal
o
OS: iOS11 (iPhone 7)
0
Web browser: Safari 11
OS: iOS11 (iPad 5th generation)
0
Web browser: Safari 11
OS: Android 7 (Nexus9)
0
Web browser: Chrome
OS: Windows 8.1 (Surface)
0
Web browser: Internet Explorer 11
Preparation on the Camera
Attach a wireless LAN adapter to the USB host terminal of
o
the camera
Only a Wi-Fi connection adapter can be connected to the USB host
0
terminal.
Connect or disconnect an adapter only after you have turned off the power
0
of the camera recorder.
1
Enable the network connection.
Set "MENU"F"System"F"Network" to "On".
.
2
Configure the connection settings.
Tap "Settings" that is directly below "Network", select "Connection
Setup" and tap "SET".
Connection Setup
.
A wizard screen appears. Follow the instructions on the screen to
0
perform setting.
On
Off
Connecting
Direct Connection
This mode of connection enables direct access to the web functions of this
camera from devices such as a smartphone, tablet terminal or PC.
1
(Operation on this camera)
Launch the wizard screen and tap 1.
Starting up the wizard screen ("Preparation on the Camera" (A p. 79) )
Available Adapter
.
2
Select "Direct Connection" and tap 1.
Direct Connection
.
Follow the screen instructions to complete setting.
Configure the settings for the following.
Configuration method
0
* Configuration of SSID and passphrase in the case of manual
configuration.
If there is no need to alter the displayed SSID and passphrase, write
down the information and tap the 1 button.
To proceed to the next step, tap 1. To return to the previous step, tap
0.
3
Tap PDONE at the lower right of the screen.
Finished
Completed the Setup Wizard.
Please Input the Passphrase
into Your Device.
.
* Screen when "Manual" is selected and configuration is complete.
When "WPS" is selected on the "Select Setup Type" screen, the
0
following steps 4 and 5 are not required.
4
Tap "STATUS".
Camera Function...
.
Using Wi-Fi
Wireless LAN
79
Advertisement
Table of Contents
