Table of Contents
Advertisement
Streaming Server Settings Menu
Alias
For setting a name to distinguish the settings of this camera.
Memo :
The default values are Server1/Server2/Server3/Server4.
0
You can enter up to 31 characters.
0
Type
For setting the system to transfer videos for distribution.
Memo :
Use reception devices that are compatible with the respective transfer systems.
0
The following items that can be set vary depending on the setting of this item.
0
Destination Address
For setting details such as the host name and the IP address of the live distribution destination.
Memo :
Enter not more than 127 characters using single-byte alphanumeric characters (a to z, 0 to 9), single-byte hyphen "-" or dot ".".
0
Destination URL
For entering the URL of the live distribution destination beginning with "rtmp://".
There is no default value (blank).
Memo :
You can enter up to 191 characters.
0
Destination Port
Enter the network port number of the live distribution destination using an integer between 1 and 65535.
The default value is 6504.
Memo :
When "Type" is set to "MPEG2-TS/RTP", only even numbers from 2 to 65530 can be specified for the port number of the destination port.
0
When "Type" is set to "MPEG2-TS/RTP" and "SMPTE 2022-1 FEC" is set to "On", N+2 and N+4 port numbers are also used in addition to the specified port
0
number (N) of the destination port.
Stream Key
Enter the stream key specified at the live transmission destination.
There is no default value (blank).
Memo :
You can enter up to 63 characters.
0
Password
Changes the password for RTSP authentication to enable client access.
There is no default value (blank).
Memo :
You can enter up to 31 characters.
0
PCR Jitter
For configuring the setting to reduce PCR Jitter during live streaming.
Setting
Low
Normal
Reduces PCR Jitter.
Choose this setting if the decoder is not functioning correctly.
Description
Settings Menu
123
Advertisement
Table of Contents
