JVC GZ-RY980 Detailed User Manual page 102

Settings Menu
Lolux
For configuring the Lolux mode (low-light recording mode) to increase the light sensitivity level at a dimly-lit location.
Setting
On
Off
Memo :
This is selectable only during Manual recording.
0
Detail
For adjusting the contour (detail) enhancement level.
Setting
-10 to -1, 0, +1 to +10
Off
For adjustment of the details, go to "Detail Adjust Menu" (A p. 104) .
Memo :
This is selectable only during Manual recording.
0
Gamma
For adjusting the gamma curve that determines the gradation expression.
Setting
Standard
Cinema
Caution :
Gamma cannot be selected in the following cases.
0
– During Auto recording
– When "WDR" is set to "On"
Level
Adjusts the corresponding gamma level when "Gamma" is set to "Standard" or "Cinema".
Setting
-5 to -1, 0, +1 to +5
102
Enables the Lolux setting.
Disables the Lolux setting.
Increasing the value increases the sharpness of the contour.
Does not perform correction.
Sets to a standard gamma curve.
Sets to a gamma curve with similar gradation to the screen characteristics of movies.
Increasing the value enhances the gradation of the shadows. However, the gradation of bright areas deteriorates.
Decreasing the value enhances the gradation of the highlights. However, the gradation of shadows deteriorates.
Description
Description
Description
Description