Table of Contents
Advertisement
Recording
Operation Buttons for Video Recording
A
54min
B
- - - min
SLOT
PLAY
.
Operation
Buttons
Auto/Manual
A
Selection Button
Card Slot
B
Selection Button
Still Image
C
Recording Button
Playback Mode
D
Button
Recording Start/
E/ F
Stop Button
Menu Button
G
Display Button
H
20
TC
00 : 00 : 00 . 00
REC
2018 - 01 - 01
02 : 23 : 01
REC
MENU
Description
Switches between the Auto and Manual
recording modes.
Switches the card slot to use between Slot
A and Slot B.
Tap this button to record a still image during
recording standby.
"Capturing Still Images" (A p. 21)
Switches to the playback mode.
Functions as the START/STOP button.
Displays the main menu.
"Operating the Menu" (A p. 97)
Switches the display between full (m) and
simple (n) with every tap of the button.
Simple display: Some displays
0
disappear automatically when the
screen is not operated.
Full display: Displays everything. The
0
display button changes from n to m.
When the power is turned off, the display
0
setting will revert to simple display (n).
Caution :
Do not expose the lens to direct sunlight.
0
While this unit can be used with the LCD monitor reversed or the LCD
0
monitor closed with "LCD CLOSED RECORDING" activated, the
temperature of this unit rises more easily. Leave the LCD monitor open
when using this unit for long periods of time, or in places exposed to direct
sunlight or high temperatures.
The power may turn off to protect the circuit if the temperature of this unit
0
rises too much.
This unit is a microcomputer-controlled device. Electrostatic discharge,
0
external noise and interference (from a TV, a radio, etc.) might prevent it
from functioning properly. In such a case, close the monitor screen to turn
off the power and remove the AC adapter, then press the Reset button to
reset this unit.
"Resetting this Unit" (A p. 131)
Disclaimer
0
– We shall not be liable for any loss of recorded contents when videos or
audio cannot be recorded or played back properly due to malfunction
of this unit and accessories that come with it or the SD card.
– Recorded contents (data) that are lost, including loss due to malfunction
of this unit, cannot be restored. Please be forewarned.
– JVC will not be responsible for any lost data.
Memo :
Check that the remaining recording time in the media is sufficient before
0
you start recording. "Checking the Remaining Battery Level and
Recording Time" (A p. 48)
If the remaining recording time is not sufficient, save the files on a PC or
disc before deleting the files from the unit. "Deleting Unwanted Files"
(A p. 59)
Due to the specifications of this unit, continuous recording for a duration
0
of 12 hours or longer is not possible when recording is performed with
"System" set to "HD". Recording stops automatically 12 hours after it is
started.
(It may take some time to resume recording.)
Up to 4GB per video file can be recorded. File recorded using long
0
recordings that exceeds 4GB is split and recorded into several video files.
However, recording up to 64 GB or 4 hours is possible when "4 GB
Spanning" is set to "Off (SDXC)" (This is configurable only when "System"
is set to "4K" or "High-Speed", and when an SDXC card is used.)
Depending on the shooting conditions, the four corners of the screen may
0
appear dark, but this is not a malfunction. In this case, change the shooting
conditions by moving the zoom lever, etc.
Advertisement
Table of Contents
