Panasonic FP7 User Manual page 43

I/O Allocation
The I/O numbers in the timing chart and program are shown on the condition that the first
word number of the unit is 10. Actual I/O numbers allocated to the analog input unit are
determined by the first word number.
*1 Comparison execution relay
*2 Upper limit comparison relay
*3 Lower limit comparison relay
*4 Comparison execution flag
Configuration
Name
Function Upper limit /
setting Lower limit
comparison
Upper/Lower limit comparison
Upper limit comparison ON
level
Upper/Lower limit comparison
Upper limit comparison OFF
level
Upper/Lower limit comparison
Lower limit comparison OFF
level
Upper/Lower limit comparison
Lower limit comparison ON
level
(Note) Make the following level settings for upper/lower limit comparison.
Lower limit comparison ON level ≤ Lower limit comparison OFF level < Upper limit comparison OFF level ≤ Upper
limit comparison ON level
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
6.4 Comparison for Upper and Lower Limits
CH0 CH1 CH2
Y103 Y113 Y123
X111 X131 X151
X112 X132 X152
X113 X133 X153
Default Setting range and description
Not Select the desired function to be used.
execute
K0 Set the upper limit to turn ON the output flag at the time of using
the upper/lower limit comparison function.
Setting range: -31,250 to +31,250 (specified with a signed integer)
K0 Set the upper limit to turn OFF the output flag at the time of using
the upper/lower limit comparison function.
Setting range: -31,250 to +31,250 (specified with a signed integer)
K0 Set the lower limit to turn OFF the output flag at the time of using
the upper/lower limit comparison function.
Setting range: -31,250 to +31,250 (specified with a signed integer)
K0 Set the lower limit to turn ON the output flag at the time of using
the upper/lower limit comparison function.
Setting range: -31,250 to +31,250 (specified with a signed integer)
CH3
Y133
X171
X172
X173
6-9