To Stop Cleaning Process Before Lock Light Comes On; To Stop Cleaning Process After Lock Light Comes On - Jenn-Air S105 Use And Care Manual

Grill-range with self-cleaning oven
Table of Contents

Advertisement

6. The oven CLEAN LIGHT will glow when all steps are completed properly, except
when set for a delayed start. The CLEAN LIGHT will come on when the cleaning
process starts. The light goes off at the end of the time set on the clock.
7. The cleaning process begins immediately unless the self-cleaning process has been
set for a delayed start. When the oven temperature reaches 550 °, the LOCK LIGHT
will glow and the door cannot be opened until the temperature drops below 550°F.
DO NOT TRY TO UNLOCK.THE DOOR WHILE LOCK LIGHT IS ON. The normal
cleaning process takes the time selected on the clock plus about 45 minutes for the
oven to cool down before the LOCK LIGHT goes out and the door can be opened.
8. After the LOCK LIGHT goes out, move the DOOR LOCK LEVER to the left. The oven
door can now be opened. This step also stops the self-cleaning process.
9. Turn the SELECTOR and TEMPERATURE knobs from CLEAN to OFF after the door is
unlocked.
IMPORTANT:
IFTHE TEMPERATURE KNOB IS TURNED TO OFF BEFORE THE
DOOR IS UNLOCKED, THE DOOR WILL NOT OPEN. Forcing the lock will damage
the lock mechanism. Return TEMPERATURE knob to CLEAN, unlock the door, then
turn TEMPERATURE knob OFF.
NOTE: A fan comes on whenever the SELECTOR knob is set on CLEAN; therefore,
the fan will continue
to operate at the end of the cleaning
process until the
SELECTOR knob is turned OFF. The fan will also start as soon as the controls are set
for a delayed start of the self-cleaning process.
To
stop
cleaning
process
before
lock
light
comes
on
1. Move the DOOR LOCK LEVER to the left.
2. Turn SELECTOR and TEMPERATURE knobs from CLEAN to OFF.
3. Turn STOP TIME dial until it pops out. Pointer should be at the same
time of day as the oven clock.
To
stop
cleaning
process
after
lock
light
comes
on
1. Turn the STOP TIME dial until the knob pops out and the CLEAN light
goes out.
2. Leave the TEMPERATURE and SELECTOR knobs in the CLEAN position.
3. Allow oven to cool until the LOCK LIGHT goes out. This may take up to 45 minutes,
depending on how tong the oven has been on.
4. After LOCK LIGHT goes off, move the DOOR LOCK LEVER to the left.
5. Turn SELECTOR and TEMPERATURE knobs from CLEAN to OFF.
36

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents