Grilling; To Install Grill; To Remove Grill; Installing Other Accessories - Jenn-Air S105 Use And Care Manual

G tnlng
The grill accessory consists of two black grill grates, a grill element and two grill*rock cartridges.
To Install Grill
1. Before installing grill components, be certain surface controls are on the OFF position.
2. Place the two gri)l-rock cartridges into an empty grill basin with their handles running
para}lel to the front of the range. These cartridges must be used since they support the grill
e(ement.
3. Position the grill element with the terminal plug towards the terminal receptacle. This
receptacle is located at the front of the left side and &t the back of the right side of the
range. S}ide the element towards the receptacle until the terminal plug is completely
engaged.
4. The grill element should now rest on the handles of the grill-rock cartridges,
5. Place the black grill grates on the top of the range top.
To Remove GJ,il
Remove grill components once they are cool Be sure Control switches are in the OFF
position.
To remove grill element, pull away from receptacle until it is unplugged. Oo not _ift the
element while it is engaged in the receptacle since this could damage the terminal.
A storage tray, Modet A350, is availab(e for purchase and can be used for storing the grill
assembly.
lnstaUng Other Accessories
1. Remove the two black gri(( grates from the grill Now you are ready to use the opt(ona( grill-
range accessories.
2. Review the instructions for installing and using the accessories that are packaged with the
accessory.
17