Twin Needle - SPIEGEL SP3201 Operation Manual

a

Twin needle

b
- Turn the stitch length dial to the desired stitch length.
- Turn the stitch selector to straight stitch, center needle position, width
setting "0". (for 3-dial models)
- Make sure that the two threads used to thread the twin needle are of
the same weight. You can use one or two colors.
- Insert the twin needle in the same way as single needle. Flat side of
needle should face away from you.
- Thread each needle separately.
Please Note:
When sewing with a twin needle, always proceed slowly and make
sure to maintain a low speed to ensure quality stitching. When using
twin needle on zigzag stitches, make sure the stitch width dial is set
between "1" and "3". Do not use twin needles at settings above "3".
a. Stitch width
b. Stitch length
37