Sewing With The Optional Hemmer Foot - SPIEGEL SP3201 Operation Manual

Sewing with the optional Hemmer foot

a b
* The hemmer foot is an optional accessory not supplied with your machine.
For hems in fine or sheer fabrics.
Set the stitch pattern dial to " " or " ".
Change to optional hemmer foot. (1)
Neaten the edge of the fabric. At the beginning of the hem, turn under
the edge twice by about 3mm (1/8 inch) and sew 4-5 stitches to secure.
Pull the thread slightly toward the back. Insert the needle into the fabric,
raise the presser foot, and guide the fold into the scroll on the foot (2).
Gently pull the fabric edge toward you and lower the presser foot. Begin
1
sewing, guiding the fabric into the scroll by holding it upright and slightly
to the left (3).
a. Stitch width
b. Stitch length
2 3
27