Attaching The Presser Foot Holder - SPIEGEL SP3201 Operation Manual

a
b
1
e
3
a
e
c
b
d
f
2
g
4
9

Attaching the presser foot holder

Attention:
Turn the power switch to ("O") when carrying out any of these
operations!
Raise the presser foot lever (a). (1)
Attach the presser foot holder (b) as illustrated.
Attaching the presser foot
Lower the presser foot holder (b) until the cut-out (c) is directly above
the pin (d). (2)
Raise the lever (e).
Lower the presser foot holder (b) and the presser foot (f) will engage
automatically.
Removing the presser foot
Raise the presser foot. (3)
Raise the lever (e) to disengage the foot.
Attaching the Edge/quilting guide
Attach the edge/quilting guide (g) in the slot as illustrated.
Adjust according to need for hems, pleats, etc. (4)