SPIEGEL SP3201 Operation Manual page 4

9. To avoid injury through inadvertently switching on the machine, always unplug it when leaving it
unattended.
10. Always unplug the machine to perform maintenance (oiling, cleaning) or change the lamp.
11. Never pull the cord. Always unplug the machine by gripping the plug.
13. Never place anything but your foot on the pedal.
14. Never use the machine if the air vents are blocked. Keep the air vents and the foot pedal free
from dust.
15.The machine may only be used with foot pedal types KD-1902, FC-1902 (110-120V area) /
KD-2902, FC-2902A, FC-2902C, FC-2902D (220-240V area) / 4C-316B (110-125V area),
4C-316C (127V area) / 4C-326C (220V area), 4C-326G (230V area), 4C-336G (240V area),
4C-336G (220-240V area).
16. The foot pedal cord cannot be replaced. If the foot pedal cord is damaged, the foot controller must
be disposed of.
17. The noise produced by the Spiegel SP3201 during normal operation is not more than 75dB(A).
18. Do not dispose of electrical appliances as unsorted municipal waste. Use separate collection
facilities. Contact your local government for information regarding the collections systems
available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can
leak into the groundwater and enter the food chain, damaging your health and well-being.
SAVE THESE INSTRUCTIONS
This sewing machine is intended for household use only.
II