Sewing On Buttons - SPIEGEL SP3201 Operation Manual

Sewing on buttons

a b
Move the drop feed control to lower the feed dogs. (1)
Change the presser foot to the button sewing foot.
Position the work under the foot. Place the button in the desired
position, lower the foot. Set the pattern selector knob to zigzag " ".
Adjust the stitch width to "3" - "5" according to the distance between the
two holes of the button. Turn the handwheel to check that the needle
goes cleanly into the left and right holes of the button. Set the pattern
selector knob on straight stitch " " and sew a few securing stitches. Set
the pattern selector knob on zig zag stitch " " and slowly sew on the
button with about 10 stitches. Set the pattern selector knob on straight
stitch " " and sew a few securing stitches. (2)
If a shank is required, place a darning needle on top of the button and
sew. (3) For buttons with 4 holes, sew through the front two holes first
a
(2), push the work forward and then sew through the back two holes as
described. (3)
b
a
b
1
a. Stitch width
b. Stitch length
2 3
24