Winding The Bobbin - SPIEGEL SP3201 Operation Manual

1
2 3
4 5
7
8
6
9 10
10

Winding the bobbin

- Place the thread and spool holder onto the spool pin (1).
- For smaller spools of thread, position the spool holder with the small
side next to the spool (2).
- Snap the thread into thread guide (3).
- Wind the thread clockwise around the bobbin winder tension discs (4).
- Thread the bobbin as illustrated and place it on the spindle (5).
- Push the bobbin to the right (6).
- Hold the thread end (7).
- Press down on the foot pedal (8).
- Cut the thread (9).
- Press the bobbin to the left (10) and remove.
Please Note:
When the bobbin winder spindle is in "bobbin winding" position, the
machine will not sew and the hand wheel will not turn.
To start sewing, push the bobbin winder spindle to the left (sewing
position).