Before Operation - JUKI MH-486-5 Instruction Manual

BEForE oPEratIoN

cautIoN :
Check the following so as to prevent maloperation of and damage to the machine.
• Before you put the machine into operation for the first time after the set-up, clean it thoroughly .
remove all dust gathering during transportation and oil it well.
• Confirm that voltage has been correctly set.
Confirm that the power plug has been properly connected to the power supply.
• Never use the machine in the state where the voltage type is different from the designated one.
• The direction of normal rotation of the machine is counterclockwise as observed from the pul-
ley side.
Take care not to allow the machine to rotate in the reverse direction.
• Never run the sewing machine before filling the oil pan with oil.
• Be sure to remove thread from the machine head and loopers before starting a trial run.
• For the first month, decrease the sewing speed and run the sewing machine at a speed of 4,000
sti/min or less.
• When you carry the sewing machine, keep hands away from the detector located behind the
handwheel.
• operate the handwheel after the machine has totally stopped.
cautIoN :
Note that safety devices such as "belt cover", "finger guard", etc. may be omitted from the
illustrations in this Instruction Manual for easy explanation.
When operating the machine, be sure not to remove these safety devices.
vi