Network Stack - Gigabyte R281-Z91 Service Manual

5-2-10 Network Stack

Network stack
Enable/Disable the UEFI network stack.
Options available: Enabled/DIsabled. Default setting is Enabled.
Ipv4 PXE Support
Enable/Disable the Ipv4 PXE feature.
Options available: Enabled/DIsabled. Default setting is Enabled.
Ipv4 HTTP Support
Enable/Disable the Ipv4 HTTP feature.
Options available: Enabled/DIsabled. Default setting is Disabled.
Ipv6 PXE Support
Enable/Disable the Ipv6 PXE feature.
Options available: Enabled/DIsabled. Default setting is Disabled.
Ipv6 HTTP Support
Enable/Disable the Ipv6 HTTP feature.
Options available: Enabled/DIsabled. Default setting is Disabled.
Ipv6 Configuration Policy
Sets the IP6 Configuration Policy.
Options available: Automatic/Manual. Default setting is Manual.
PXE boot wait time
Press the <+> / <-> keys to increase or decrease the desired values.
Media detect count
Press the <+> / <-> keys to increase or decrease the desired values.
This item appears when Network Stack is set to Enabled.
(Note)
(Note)
(Note)
(Note)
(Note)
(Note)
(Note)
(Note)
- 77 - BIOS Setup