Installing And Removing An M.2 Solid State Drive - Gigabyte R281-Z91 Service Manual

3-7

Installing and Removing an M.2 Solid State Drive

Follow these instructions to install an optional M.2 solid state drive (SSD):
1. Place the solid state drive into the M.2 connector.
2. Secure the solid state drive to the motherboard with a single screw.
NOTE: The position of the screw will depend on the size of the SSD. Refer to the second image
2
below for proper placement.
3. Reverse steps 1-2 to remove the solid state drive.
System Hardware Installation
2
1
1
- 26 -