Table of Contents
Advertisement
3-1
Removing and Installing the Chassis Cover
Before you remove or install the system cover
• Make sure the system is not turned on or connected to AC power.
Follow these instructions to remove the chassis covers:
1.
Loosen and remove the thumbscrew securing the chassis cover.
2.
Push down on the indentations located on the side of the chassis cover.
3.
Slide the chassis cover to the rear of the system and then remove the cover in the direction of the
arrow.
4.
To reinstall the chassis cover follow steps 1-3 in reverse order.
1
System Hardware Installation
2
3
- 17 -
2
2
Advertisement
Table of Contents
