3-1
Removing and Installing the Chassis Cover
Before you remove or install the system cover
• Make sure the system is not turned on or connected to AC power.
Follow these instructions to remove the chassis covers:
1.
Remove the single screw securing the cover.
2.
Loosen the two thumbnail screws securing the top rear cover in place.
3.
Push down on the indentations located on the side of the chassis cover.
4.
Slide the cover towards the rear and remove the cover in the direction indicated.
5.
To reinstall the chassis cover follow steps 1-4 in reverse order.
2
System Hardware Installation
3
4
- 24 -
1
3