Removing Chassis Cover - Gigabyte R280-F2O Service Manual

2-1

Removing Chassis Cover

Before you remove or install the system cover
• Make sure the system is not turned on or connected to AC power.
Follow these instructions to remove the system cover:
1. Loosen and remove the screws securing the back cover.
2. Loosen and remove the screws securing the front cover.
3. Remove the front cover.
4. Slide the back cover toward the rear of the chassis to disengage it.
Hardware Installation
4
2
3
2
2
1
4
1
4
- 16 -
1