FLIR ioi HD CF-5212 Quick Install Manual

A. Connect the Camera
B. Discover the Camera
The unit's GUI is supported by IE 9 and higher (32-bit)
with the ActiveX plug-in on PCs running 64-bit Windows XP,
7, 8, 8.1, or 10.
B.1. Configuring the encoder on your workstation for
the first time
1. Install the CD in the product package or download FLIR's
Discovery Network Assistant (DNA) utility from the Support
> FLIR Firmware & Software Downloads page at http://
www.flir.com/security.
2. Click the DNA icon and run DNA v. 2.1.x.x or above to log
into the unit.
3. Attach the unit to the same LAN segment as the computer
that is managing the unit. DNA automatically discovers the
unit on the network and displays the device's current IP
address in the Discover List.
4. Select the unit from the Discover List.
5. From the context menu, or from the Properties > Device
Properties screen, select the unit, select PAL or NTSC,
click Change Video Format.
6. Click Update .
Quick Install Guide
B.2.a Managing the encoder with Horizon, Meridian or
on a DHCP-enabled network
If the encoder is managed by Horizon configured as a
DHCP server, or is on a network with a DHCP server, the
encoder automatically receives an IP address
1. Open DNA. The unit is automatically discovered on the
network. See section B.1 for instructions how to install
DNA.
2. Verify that the unit is displayed in the Discover List. The unit
status should be displayed as Online and Authenticated.
B.2.b Managing the encoder with Latitude or on a
network with static IP configuration
If the encoder is managed by Latitude or is on a network
without a DHCP server, you must manually enter its IP
address in DNA.
1. Open DNA. The unit is automatically discovered. See
section B.1.
2. If you use non-default credentials:
a. Use DNA to select the unit(s).
b. Right-click or click the Login button.
c. Enter the encoder's User Name ("admin") and
Password ("admin").
d. Click Login.
CF-5212/CF-5222
Analytic Fixed IP Cameras
3. In the DNA Assign IP screen, uncheck Use DHCP, and
enter the unit's IP, Mask and Gateway IP addresses. If the
encoder is not authenticated, you must first authenticate it.
4. Click Update.
B.3. Log into the Unit
.
1. Click the unit in DNA's Discover List. The Login window
opens.
2. Enter the default User Name ("admin") and Password
("admin"), which are case-sensitive. Then click OK.
3. Click Login in DNA. The unit's web interface opens.
4. Click the message to install the ActiveX plug-in.
5. Follow the on-screen instructions to install the plug-in.
ioi HD