To Remove The Paper From The Staple Unit - Ricoh AFICIO 1035 Copy Reference Manual

A
Press the { { { { Start} } } } key.
The scanned pages are delivered to
the tray. Then, the image data in
memory is cleared.
B
Remove the copies and continue
copying by following the instruc-
tions on the display.
To Remove the Paper from the
Staple Unit
If you cancel the stapling copy job in
the middle of the job, the paper might
be left in the staple unit. In this case,
remove the paper from the staple
unit.
A
Press the { { { { Clear Modes} } } } key to can-
cel the copy settings.
B
Set the next original, then press
the { { { { Start} } } } key.
The paper left in the staple unit is
automatically delivered, then the
next job starts.
Note
❒ When the paper is not delivered
and the message is displayed,
follow the instructions on the
display to remove the paper.
Sort/Stack/Staple
53
2