Ricoh AFICIO 1035 Copy Reference Manual page 140

Copying
F
Press the [Program/Delete Stamp]
key.
2
To program the User Stamp
A Press the [Program] key.
B Press the stamp number (1 – 4)
you want to program.
Note
❒ Stamp numbers with m al-
ready have settings in them.
❒ If the stamp number is al-
ready being used, the ma-
chine will ask you if you
wish to overwrite it — Press
the [Yes] or [No] key.
126
C Enter the user stamp name
with the letter keys on the dis-
play panel.
Note
❒ You can register up to 10
characters.
❒ For details on entering char-
acters, refer to "Entering Text
Characters" in the System
Settings manual.
D Press the [OK] key.
E Enter the horizontal size of the
stamp with the number keys,
then press the [#] key.
Note
❒ You can enter sizes within 10
– 432mm, 1.0" – 17.0" hori-
zontal, and 10 – 297mm, 1.0"
– 11.7" vertical. However, if
the value exceeds the maxi-
m u m v a l u e o f t h e a r e a
2
(5,000mm , 7.75 inch
corrected within the range of
the area automatically.
❒ To change the value entered,
press the [Clear] or {Clear/
Stop} key and enter the new
value.
2
), it is